PET Automatic Rotary Blowing Molding Machine

PET Automatic Rotary Blowing Molding Machine 1.suitable of volume 0.1~2LPET bottle 2.capacity14000~15000pcs/h 3. 10 cavity.

PET Automatic Rotary Blowing Molding Machine

Brief Introduction:

VD-R10 Full Automatic Rotary Blow Molding Machine is widely used for blowing plastic container including hot filling bottle, which is suitable for the product of water, tea drink, dairy, fruit juice, carbonnated beverage and pharmaceutical injection etc.

 

With the structure of multi-mold in one machine, can complete the actions of parison unsarambling, parison  feeding,heating, stretch, blowing, cooling and bottle conveying etc full automatically. The main component on the machine are of international brands. The machine have the advantage of high level automation, reliable and stable operation, low power consumption.

Performance and Advantage:

1. High productivity: 1700pcs each cavity per hour

2. Hopper type bottle cabinet

3. Base taking, base feeding, bottle taking and bottle arranging are fully automatically completed with manipulator for avoiding middle pollution;

4. Fully closed performance to assure the bottle without pollution

5. Complete heating system

6. Electronic test system can accurately and automatically remove defective bottles

7. Stable revolution and rotation, adjustable speed

8. Low energy consumption, the heating temperature for different sections of the bottle pipe is adjustable according to actual situation

9. Infrared ray lamp in the oven is installed with air cooling system, which can prolong the service life of infrared ray lamp and improve the efficiency of heating oven

10. After heating, the system can automatically test the temperature of bottle with infrared ray, and automatically adjust the temperature for assuring even heating temperature for dropping the rate of waste products.

Specification:

VD-R10	Item	Data
Specification of Bottle	Max. Capacity	2L
	Max. Body Diameter	120mm
	Max. Height of Bottle	320mm
	Max. Diameter of Bottle Mouth	38mm
	Max. Preform Height	145mm
Mould	Mould Cavity	10Cavities
Output	Nominal output for 0.5 L; 16.5gr bottle	17,000pcs/h(cold filling)
		13,000pcs/h(hot filling)
	Nominal output for 2.0 L; 56gr bottle	12,500pcs/h
	Rate of finished product	≥99.7%
Cooling System	Water inlet temperature	10°C
	Water inlet pressure	5-6bar
	Flow Rate	160L/min
	Cooling Capacity	10P
Air Source	High pressure	3.5~4.0Mpa
	Blowing air flux	10~24m³/min
	Low pressure	0.8~1.0Mpa
	Blowing air flux	3.5m³/min
	Filtering grade	0.01micron
	Humidity	Dehumidified
Dimension of Machine	L × W × H (Blowing)	2350×3310 ×3150mm
	Weight (Blowing)	9,000KGS
	L × W × H (Oven)	3870×1250 ×2200mm
	Weight (Oven)	2,000KGS
Motor Power	Total Power	198kW
	Main Motor	4kW
	Really Power use	35~70kW

PET Automatic Rotary Blowing Molding Machine